Hempel Silic Seal Epoxy Primer Light Red 750 ml
Hempel's Silic Seal is a two-component epoxy to enable easy conversion from antifouling to Hempel's Silic One Fouling Release System.
Can be applied on previously painted antifouling in good condition.
For use as a sealer on antifouling to secure adhesion between antifouling and Hempel's Silic One Tiecoat.
For use on all substrates excluding wood.
Surface preparation:
Identify the condition of antifouling you currently have on your boat. Use a metal scrapper to determine whether the aged antifouling adheres sufficiently. In case of bad adhesion,
remove all loose/brittle layers. Abrade with wet abrasive paper. Rinse carefully with fresh water and allow the surface to dry.
Application:
Mix the two components of Hempel’s Silic Seal thoroughly to an even consistency.
Be aware that the product has a very low viscosity and any runs and sags should be brushed out immediately. Thinning is NOT recommended.
Pot life at 20°C: 8 hours. Minimum application temperature is 5°C. In case the overcoating interval is exceeded, a new coat of Hempel’s Silic Seal or Silic One Tiecoat must be applied accordingly.
Coverage: 14.4 m2/l 25 micron
Touch Dry: 1 hour(s) 20°C/68°F, 2 hour(s) 10°C/50°F.