Torqeedo Cruise 3.0 T
The new models of the Cruise 3.0 have been improved to meet the demanding challenges of every day commercial use; making them ready to take on the harshest environmental conditions, for example with dinghies and sailboats up to 3 tons.
This makes the Cruise even more rugged in the event that it runs aground and even better protected against corrosion when used extensively in salt water.
The Cruise 3.0 is comparable to a 6 HP petrol outboard and can be easily mounted on your boat with a couple of tools, regardless of whether the remote or tiller version.
A power supply from at least one lithium battery (Power 24-3500) or with lead batteries (lead-gel or AGM) must be provided for operation.
Maximum efficiency outboard with tiller control
Improved robustness and improved corrosion protection
3,000 W input power, in terms of propulsion is comparable with a 6-hp petrol outboard
Integrated on-board computer with GPS-based range calculation
Equipment included: Outboard with tiller control, cable set (S: 4.4m L: 4.3m, 35 mm²) including main switch and propeller B 12 x 10,5 WDR, emergency magnetic stop key
Warranty: 2 years for non-commercial use
Cruise 3.0 T - Benefits:
High-efficiency outboard with 3,000 W input power, equivalent to a 6 HP petrol outboard.
All Cruise models are suitable for inflatables and other small boats.
We recommend the Cruise 3.0 for dinghies and sailboats up to to 3 tons.
This model is equipped with tiller control.
Rugged aluminium pylon with integral fin – extra robust even when running aground.
Shaft sealant rings mounted in protected area on the inside of the pylons.
Highest-grade seawater-proof aluminium for long service life, even in the harshest conditions.
Lubricant-free polymer plain bearings protect against damage from fishing lines or debris and provide improved mechanical support for propeller shaft – wear-resistant and maintenance-free.
Comprehensive galvanic corrosion protection through careful matching of all materials and meticulous isolation of materials with different electrochemical properties.
Everything is water proof to min IP67.
Technical Data Cruise
Cruise 3.0 T
Input power in watts 3000
Propulsive power in watts 1530
Comparable petrol outboards (propulsive power) 6 HP
Comparable petrol outboards (thrust) 8 HP
Maximum overall efficiency in % 51
Static thrust in lbs* 142
Integrated battery -
Nominal voltage 24
Final charging voltage -
Total weight in kg 19.7 (S) / 20.2 (L)
Motor weight without battery in kg -
Weight of integrated battery -
Shaft length in cm 62.5 (S) / 75.5 (L)
Standard propeller
v = speed in km/h at p = power in watts Propeller B 12 x 10,5 WDR
Alternative propeller options
Propeller Guide
Maximum propeller speed in rpm 1100
Control Tiller
TorqLink No
Steering 360° lockable
Tilting device Manual with grounding protection
Tilt angle 61,3°
Trim device Manual, 4-step
Integrated on-board computer Yes
Stepless forward/reverse drive Yes
* Torqeedo static thrust measurement is based on internationally accepted ISO standards. Static thrust figures for conventional trolling motors are typically measured differently, which results in higher values. To compare Torqeedo static thrust data with conventional trolling motors, add approximately 50% to the Torqeedo static thrust values.
Technical drawing/Dimensions Cruise 3/6 TS / TL